You can use the CLI, RS232 port and controller firmware to update the expander firmware on the 6 Gb/12Gb ARC-1880/1882/1883ix board. For controller update, expander firmware. Q10121501 - How can we update the on-board expander firmware on the ix series RAID adapters?.SIGNAT command is used to write the rescue result back into these array. RESCUE command does not record the result into drives and disappear after reboot. Q10111501 - The RESCUE raid set goes missing again after we reboot the raid set again.Q10101501 - Is Supermicro X10DRL-TC compatible with ARC-1883 RAID adapter?ĪRC-1883/1882/1880/12x4 series RAID adapters are compatible with Supermicro X10DRL-TC server board.

TLER, ERC and CCTL are same setting with different names.

Q10091501 - Does “TLER Setting” on system configuration translate to ERC (Seagate) and CCTL (Samsung/Hitachi) or is it only a valid setting for WD drives that have TLER?.

Q10081501 - How do we identify slow hard disk on Areca RAID Controller?įirmware version 1.52 date: or later has supported a firmware-level hard disk / SSD speed test function “Hdd Xfer Speed” that is used to.

This is a bug of Samsung 840 EVO and 850 Pro firmware that can’t response correctly the SSD cache control from the host.

Q10071501 - ARC-1882ix-12 reports SSD as 'failed' and not free when Adaptec ASR-7805 formats Samsung 840 EVO and erases it again.

This issue has been fixed in firmware version 1.52 date: or later.

Q10061501 - When Intel S5520HC boots and RAID firmware (4) is initializing encryption volumes, BIOS displays a warning 'The above volume is not in normal state”.

Q10051501 - Does ARC-1880 support RAID00 or RAID100?įirmware version 1.49 date: or later has supported multiple RAID00 and RAID100.

This issue has been fixed in Storport driver version 6.20.00.31.

In the memory dumps, we are seeing the following:įAILURE_BUCKET_ID: X64_0xD1_CODE_AV_NULL_IP_storport!RaidpAdapterDpcRoutine+53ĮxceptionAddress: fffff88001106c3d (storport!RaUnitAsyncError+0x000000000000013d)

Q10041501 - Windows XP 64-bit systems blue screen is pointing to the storport.sys file.

This is a bug of Adata’s SX900 firmware that can’t response correctly the command to enable “SATA Power Up In Standby “.

Q10031501 - After enabling ARC-1883 “SATA Power Up In Standby “ with Adata’s SX900, a power down, and a new power up reports “failed disk”.

Q10021501 - Does Areca RAID controller-1882ix support bootable from 4KB volumes?Īreca RAID controller UEFI BIOS code V1.34 date: or later can support bootable from 512 or 4K byte volume. It isn't possible to boot from a 4K.

Q10011501 - Are ARC-1680 series RAID adapters compatible with ARC-8028 12Gb/s SAS expander?ĪRC-1680x and 1680ix are compatible with ARC-8028 12Gb/s SAS expander module.

Hp dmi tool 2016